Marantz CDR310 - Manual (Page 55)

47
ENGLISH
Troubleshooting
If you think a malfunction has occurred, there may be no
need to contact the dealer or the repair service counter.
Please check the following points. You can easily solve many
problems without needing to ask for professional help. If
the problem cannot be solved even after performing these
checks, contact your dealer.
Recorder power will not turn on.
• Insert new batteries.
• If you are using rechargeable batteries, recharge the
batteries.
• Check the connection of the AC adaptor.
The recorder power turns itself off after it is turned on.
• Insert new batteries.
There is no sound from the internal speakers.
• Check the LEVEL volume setting on the front side of the
recorder.
• Check the ON/OFF position of the speaker switch on the
front side of the recorder.
Cannot record
• Check that the input source settings are correct.
• Check to see if the maximum number of tracks, 999
tracks, have been recorded.
• Check that there is enough recording time remaining on
the HD.
There is no signal from the microphone input.
• Check the input source settings. (
☞
P.22)
• Check the recording level settings. (
☞
P.25)
• Check if the microphone requires Phantom power. (
☞
P.28)
Cannot change recording format.
• There can be only one HD recording format.
If tracks already recorded in a certain format already
exist, the format cannot be changed.
To change the recording format, either burn the data to a
CD, or format the HD.
Too much noise
• Check the cable connection between each device.
Replace the cable if required.
• Check that the recording level is suitable.
Care and maintenance
Dip a soft cloth into water mixed with a small amount of
neutral detergent, wring out the cloth, and gently wipe the
recorder.