Moxa Technologies NE-4100 - Manual (Page 64)

NE-4100 Series User’s Manual Web Console Configuration
7-8
Configuring NE-4100
1. Select the NE-4100 module you wish to configure, click the right mouse button, and then
select Configure from the drop down list.
2. The next window to open shows that Configurator is processing the configuration of that
NE-4100 Series module.
3. After the processing is done, the Configurator window will open.
The Configurator window has nine tabs—Basic, Network, Serial, Operating Mode, Accessible
IPs, Auto Warning, IP Address Report, Password, and Digital IO—that allow the user to view
and modify basic parameters related to the NE-4100 operation. Refer to Chapter 6 for each
parameter’s function definition. To modify the configuration, you must first click in the Modify
box to activate the parameter setting box.