Moxa Technologies NE-4100 - Manual (Page 73)

NE-4100 Series User’s Manual Web Console Configuration
7-17
3. Add the target that you
would like to map COM
ports to.
4. The NE-4100 list that
appears is based on the
Broadcast Search. Select
the NE-4100 that you
would like to map COM
ports to.
5. Select COM Setting to
modify COM No., default
setting, etc.
6. Select the COM No. Those “in use,”
“assigned” COM ports will also be
indicated in this window.
If you select multiple serial ports or
multiple NE-4100s, remember to check
the “Auto Enumerating” function to use
the COM No. you select as the first
COM No.