Marantz SR8001 User Manual
Page 13
ENGLISH
10
LCD INDICATORS
Information about currently selected source and
direct code names are displayed on the LCD.
LEARN
NAME
MACRO
USE
PAGE
1 2 3 4
A
B
C
D
E
F
G
H
I
J
A
Source Name indicator
This displays the name of the selected source, such
as DVD, television, or other AV equipment (up to fi ve
characters).
B
Direct Button Name indicator
This displays up to 20 types of button names for each
source. (up to six characters)
C
Page
indicator
This displays the current page position.
D
Transmission
indicator
This lights up when the remote control is sending a
signal.
E
USE
indicator
This is displayed under normal operation.
F
Battery Level indicator
This is displayed when the battery level is low.
G
TIMER
indicator
This is displayed when the macro timer is set.
H
MACRO
indicator
This is displayed when the remote control is in macro
programming mode.
(7) DISP. button
Selects the display mode for the front display of the
SR7001.
(8) OSD button
When this button is pressed, the current setting are
displayed on the TV monitor.
(9) SLEEP (sleep timer) button
This button is used for setting the sleep timer. It can
be operated the same way as the button in unit.
(0) THX button
Use this button to select the THX mode.
⁄2
MEMO
button
This button is used to store settings to memory or
program a source.
⁄3
CONTROL
button
Thses buttons are used when operating the PLAY,
STOP, PAUSE, and other commands of a source.
Note:
• This button is unavailable for the SR7001.
⁄4
SOURCE
button
Thses buttons are used to switch the source of your
A/V Receiver / amplifer. Each time a source button is
pressed, the remote control changes to the source
which was pressed.
This remote control can control 12 types of equipment.
To change the A/V Receiver / amplifi er source, press
this button twice within two seconds. The signal is
sent when it is pressed the second time.
Note:
• Select the AMP as the source to use this remote
controll with the SR7001.
• The MD button does not work with the SR7001.
⁄5
LIGHT 1 and 2 buttons
Pressing these buttons will light up the LCD and its
buttons. This lighting time can be set. If the lighting
time is set to 0 seconds, the backlight turns on only
while this button is pressed. The operations for
LIGHT 1 and 2 are identical.
⁄6
CLEAR
button
This button is used to erase the memory or program
of a source.
⁄7
MENU
button
(when AMP mode is selected)
This button is used to call up the SETUP MAIN
MENU of the SR7001.
⁄8
PREV (Previous) button
This button is used to return to the previous channel
on the television or other device.
Note:
• This button is unavailable for SR7001.
⁄9
CH (Channel) button
This is used to change channels.
¤0
CURSOR
buttons
These buttons are used when controlling the cursor
of the SR7001, DVD, or other AV equipment.
¤1
LCD
Information about the sources and modes are shown
on the LCD.
I
NAME
indicator
This is displayed when the remote control is in
renaming mode.
J
LEARN
indicator
This is displayed when the remote control is in
learning mode.