Pb cr, Pr cr, Pr cb – Marantz SR8001 User Manual

Page 18: Pb cb, 12 emitter out a b, Front b surr. cen ter front a

Advertising
background image

ENGLISH

15

HDMI JACK

This SR7001 has four HDMI inputs and one HDMI
output (The SR8001 has two HDMI outputs.). It can
send digital video and audio signals from DVDs and
other sources directly to a display. It minimizes signal
degradation caused by analog conversion so that high
quality images can be enjoyed.
The SR7001 is also capable of converting analog
video signals (Composite Video, S-Video, Component
Video) for HDMI output.
Select an input source from the OSD menu system.
(See page 25, 36)

Notes:

• When the HDMI output is connected to a display

monitor that does not support HDCP, signals are not
output. To view images in HDMI, it is necessary to
connect to a display that supports HDCP.

• There may be no image output if connected to a

TV or display that is not compatible with the above
format.

• Refer to the instruction manual of the TV or display to

be connected to the SR7001 for detailed information
regarding the HDMI terminal.

* HDCP: High-bandwidth Digital Content Protection

CONNECTING HDMI DEVICES

An HDMI cable (sold separately) is used to connect the
HDMI jack on the SR7001 with the HDMI jack on a DVD
player, TV, projector or other component. To transmit
multichannel audio via HDMI, the connected player
must support multichannel audio transmission through
its HDMI jack.
HDMI video streaming is compatible with DVI in
principle. Therefore, it is possible to connect to a TV
or monitor that has a DVI terminal using an HDMI-DVI
conversion cable or plug. When connecting to a DVI
terminal, connect the audio signal separately.

Notes:

• Some HDMI components can be controlled over the

HDMI cable, but this receiver cannot control other
components this way.

• When connected to a monitor (i.e., TV, projector,

etc.) that does not support HDCP, video and audio
are not output.

• DVI cables come with 24-pin and 29-pin plugs. This

receiver supports 24-pin DVI-D cables; 29-pin DVI
cables cannot connect to it.

• Some source devices such as DVD players or set

top box do not support HDMI repeater operations
like those of the SR7001. In such case, pictures are
not properly projected on monitors such as TVs and
projectors.

DVD player

VIDEO PROJECTOR

• When multiple components are connected to this

receiver, turn power to unused components off to
prevent interference between them.

• Disconnecting or connecting cables with the power

on can damage the equipment. Turn the power off
before disconnecting or connecting cables.

• Some DVD-Audio disks disable downmixing.

These types of disks are not played back correctly
unless the left, center, right and surround left and
right speakers, and subwoofer are connected.

• If a DVD player that does not support HDMI 1.1

is connected to the SR7001, multi channel PCM
playback is not possible even with DVD-Audio
disks.

• If an Super Audio CD player that does not support

HDMI 1.2 is connected to the receiver, DSD
playback is not possible even with Super Audio
CD.

(*DSD: Direct Stream Digital)

• If a DVD player or other device with DVI output

is connected to the SR7001, a separate audio
cable (optical-digital, coaxial digital or analog) is
needed for the audio signals. In this case, select the
connected audio input as explained in “1-1 FUNC
INPUT SETUP
”. (See page 25)

• Multi channel PCM signals and audio signals of 62

kHz or higher that are input from the HDMI jack are
not output from the DIGITAL OUT jacks.

• Depending on the quiality of the cable used, the

HDMI signal may be affected by noise.

COMPONENT

VIDEO

IN

OUT

S-VIDEO

IN

OUT

2

1

SL

L

R

SR

FLASHER

IN

IR

RECEIVER

IN

SPEAKER
SYSTEMS

OUT

6

COAX.

3

5

4

2

1

SURROUND

BACK

OUT

R

OUT

L

TAPE

CD/CDR

ON

OFF

OUT

IN

MULTI OUT

R

OUT

L

DSS/VCR2

AUDIO

TV

IN

OPT.

IN

OUT

IN

OUT

IN

SR

VCR1

IN

IN

DVD

SL

CB

/

PB

CR

/

PR

CR

/

PR

CR

/

PR

CB

/

PB

CB

/

PB

Y

Y

Y

SBR

SBL

SBR

SBL

C

SW

SW

C

R

L

R

L

R

R

R

L

L

L

1

2

EMITTER

OUT

A

B

UNSWITCHED

1.25A 150W MAX

AC OUTLETS

120V 60Hz

SWITCHED

1.25A 150W MAX

VIDEO

FM (75

Ω)

GND

AM

ANTENNA

OUT
PUT

1

OUT
PUT

2

INPUT 3(VCR1)

OUTPUT 1

OUTPUT 2

INPUT 1(TV)

INPUT 1(TV)

INPUT 4(DSS/VCR2)

INPUT 3(VCR1)

INPUT 4(DSS/VCR2)

INPUT 2(DVD)

HDMI
Ver1.2

INPUT 2(DVD)

DC OUT

PRE

OUT

DIGITAL IN

DIGITAL OUT

RC-5 MULTI RC

7.1CH

IN

MONITOR

OUT

DVD(2)

DSS/VCR2(4)

TV(1)

MULTI

OUT

VCR1(3)

DVD(2)

DSS/VCR2(4)

VCR1(3)

TV(1)

MONI. OUT

(AUX2)

XM

RS-232C

MULTI SPEAKER

/SPEAKER C

SUB SPEAKER

FRONT A OR B.CENTER.SURR.
SURR BACK : MINIMUM 6 OHMS
FRONT A + B : MINIMUM 8 OHMS

FRONT

B

SURR.

CEN
TER

FRONT

A

MODEL NO. SR8001

AC IN

XM

OUTPUT 1

OUTPUT 1

INPUT 4

INPUT 4((DSS/VCR2

DSS/VCR2))

INPUT 2

INPUT 2(

(DVD

DVD)

)

HDMI

HDMI
Ver1.2

Ver1.2

HDMI OUTPUT

HDMI INPUT

HDMI OUTPUT

SATELLITE TUNER

Advertising
This manual is related to the following products: