Marantz SR8001 - Manual (Page 59)

56
ENGLISH
MULTI ROOM
SYSTEM
The Multiroom System mode allows the same source
or different sources to be heard in two rooms other
than where this receiver is installed.
To use the multiroom system, connect the audio from
the MULTI OUT A and B AUDIO output terminals to
the MULTI ROOM A and B amps.
Note:
• The SR7001 does not have a MULTI ROOM B
setting.
Connect the VIDEO output (MULTI OUT) terminal to
the monitor in Room A.
(MULTI VIDEO OUT terminal is linked to the source
selector in Multi Room A.)
If a surround channel back speaker or speaker C
(see page 20) are not used in the room where this
receiver is installed, the multi speaker system can be
used with the amp for the surround back channel.
Also, the COMPONENT VIDEO MONITOR OUT 2
terminal can be used for the monitor output of Room
A.
(This feature cannot be used with the SR7001.)
This receiver supports multiroom system functions
such as source selectors, OSD menu systems, sleep
timers and remote control.
MULTI ROOM PLAYBACK USING THE MULTI
ROOM OUT TERMINALS
DIGITAL L VIDEO S-VIDEO AUX 1 INPUT
VOLUME
DOWN
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR8001
MultEQ
ENTER MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO MULTI
A/B
T-MODE MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND SPEAKER MULTI
DSD
POWER ON/STANDBY
L C R
SL S SR LFE
DIGITAL SURROUND V-OFF DISP MULTI AUTO TUNED ST SPKR A B NIGHT PEAK ANALOG DIGITAL ATT SLEEP SURR DIRECT AUTO DISC 6.1 MT X 6.1 EQ PCM AAC
2. 1.
1. Pressing the MULTI button on the receiver one
time accesses the MULTI ROOM A settings.
Pressing it two times accesses the MULTI
ROOM B settings. Then, pressing it a third time
turns the multiroom feature off. (The SR7001
does not have a MULTI ROOM B setting.)
2. When the MULTI ROOM setting mode is
engaged, one of the following screens appears
on the display for 10 seconds.
– SR8001 –
* Display when MULTI ROOM A is selected
M A D V D - 1 8 d B
* Display when MULTI ROOM B is selected
M B D V D - 1 8 d B
– SR7001 –
The unit enters multi room mode and the display
indicates “SELECT SOURCE” and flashes the
“MULTI” indicator for approx. 10 seconds.
3. Select an input source with the INPUT
SELECTOR knob.
4. Turn the VOLUME knob to set the volume of
the room used in the multi room system as you
like.
Note:
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU.
(See page 37)
MULTI ROOM PLAYBACK USING THE MULTI
SPEAKER TERMINALS
The SR7001 allows you to connect another set
of speakers and place them in a different room or
separated area for Iistening to music.
DIGITAL L VIDEO S-VIDEO AUX 1 INPUT
VOLUME
DOWN
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR8001
MultEQ ENTER MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO MULTI
A/B
T-MODE MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND SPEAKER MULTI
DSD
POWER ON/STANDBY
L C R SL S SR LFE DIGITAL SURROUND V-OFF DISP MULTI AUTO TUNED ST SPKR A B NIGHT PEAK ANALOG DIGITAL ATT SLEEP SURR DIRECT AUTO DISC 6.1 MT X 6.1 EQ PCM AAC
2. 1.
1. Pressing the MULTI SPEAKER button on
the receiver one time accesses the MULTI
SPEAKER A settings. Pressing it two times
accesses the MULTI SPEAKER B settings.
Then, pressing it a third time turns the MULTI
SPEAKER feature off.
(The SR7001 does not have a MULTI SPEAKER
B setting.)
2. When the MULTI SPEAKER setting mode is
engaged, one of the following screens appears
on the display for 10 seconds.
– SR8001 –
* Display when MULTI SPEAKER A is selected
M S A D V D - 1 8 d B
* Display when MULTI SPEAKER B is selected
M S B D V D - 1 8 d B
– SR7001 –
The unit enters multi room mode and the display
indicates “SELECT SOURCE” and flashes the
“MULTI” indicator for approx. 10 seconds.
3. Select an input source with the INPUT
SELECTOR knob.
4. Turn the VOLUME knob to set the volume of
the room used in the multiroom system as you
like.
Note:
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU. (See page
37.)
Notes for Multi Room Speaker
• The Multiroom Speaker mode can be set for only
one of the rooms, A or B.
• The MULTI ROOM SPEAKER output terminals can
be used when Surround Back Speaker = “NONE”
in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 27)
• “The Surr. Back Speakers are in use” is displayed
when the MULTI SPEAKER button is pressed
when the Surround Back Speaker is not set to
“NONE” in the SPEAKER SETUP menu. (See
SPEAKER SETUP, page 27)
• The Multispeaker mode cannot be used at the
same time as the speaker C. When connecting for
multiroom use, set the SPEAKER C selector switch
on the rear panel to OFF.