Marantz SR8001 User Manual
Page 40
ENGLISH
37
5-1 MULTI ROOM SETUP
The SR8001 has source selectors, sleep timers and
multispeaker output remote control units (Room
A only) for the two other rooms in the multi room
system. (The SR7001 has only one other room in the
multi-room system.)
These features can be set from this menu.
1.
Select “5. PREFERENCE” from the MAIN
MENU with the
3
or
4
cursor buttons and
press the OK/ENTER button.
2.
Select “MULTI ROOM SETUP” with the
3
or
4
cursor buttons and select either “Room A” or
“Room B” with the
1
or
2
cursor buttons.
3.
Press
the
OK/ENTER button to enter the
setting.
The following explanation shows how to operate
MULTI ROOM A of the multi-room system.
The MULTI ROOM B setting does not have the
VIDEO FUNCTION.
(The SR7001 does not have a MULTI ROOM B
setting)
M U L T I R O O M S E T U P A
V I D E O :
D V D
A U D I O : D V D
S L E E P : O F F
M O N O / S T : S T E R E O
M U L T : O F F M S P K :
V O L : V A R I V O L :
L E V : - 9 0 d B L E V :
R E T U R N B A C K E X I T
4.
Select the desired item with the
3
or
4
cursor
button.
VIDEO:
Select the video source of the multiroom output
with the
1
or
2
cursor buttons.
AUDIO:
Select the audio source of the multiroom output
with the
1
or
2
cursor buttons.
SLEEP:
The sleep mode is available when the multiroom is
active, set the time with
1
or
2
cursor buttons. The
sleep timer can be set to a maximum 90 minutes
in 10 minute increments.
MONO/ST:
This mode switches audio output to the multi room
system between MONAURAL and STEREO,
using the
1
and
2
cursor buttons.
MULTI (MULTI ROOM):
Switch the multiroom output “ON” or “OFF” with
the
1
or
2
cursor buttons.
MSPK (MULTI SPEAKER):
Switch the speaker output “ON” or “OFF” with the
1
or
2
cursor buttons.
VOL (VOLUME SETUP):
Select whether the multiroom or multi speaker
output level is variable or fi xed with the
1
or
2
cursor buttons.
LEVEL (VOLUME LEVEL):
Adjust the multiroom output level with the
1
or
2
cursor buttons. The volume can be set between
-90 dB and 0 dB in 1 dB increments.
Note:
• This setting can be changed when the SURR B is
set to “NONE” in the SPEAKER SIZE menu and
“SPEAKER C” is in the OFF position on the rear
panel. When this setting is unavailable, “
✽✽✽” is
displayed.
• If “VOLUME” is set to “FIXED”, the multiroom
output level cannot be adjusted from the A or B
room.
• MSPK cannot be on for both Room A and Room B at
the same time. After you complete this portion of the
setup, move the cursor to “RETURN” with the
3 or
4 cursor buttons and press the OK/ENTER button.
5-2 DC TRIGGER SETUP
This unit has 2 DC trigger control jacks, which can
be used to link with input functions for the main room
or multiroom.
Each trigger can be setup separately.
1.
Select
“5. PREFERENCE” from MAIN MENU
with the
3
or
4
cursor buttons and press the
OK/ENTER button.
2.
Select
“DC TRIGGER SETUP 1or 2” with the
3
,
4
,
1
and
2
cursor buttons.
3.
Press
the
OK/ENTER button to enter the
selection.
D C T R I G G E R S E T U P
D C T R I G - 1 :
D I S A B L E
T V
T V : T A P E :
D V D : C D / R :
V C R 1 : A U X 2 :
D S S : T U N E R :
A U X 1 : 7 . 1 C H :
R E T U R N
N E X T
E X I T
4.
You can select “MAIN ROOM”, “MULTI
ROOM A”, “MULTI ROOM B”, “REMOTE” or
“DISABLE” with the
1
or
2
cursor buttons.
(The SR7001 does not have a MULTI ROOM B
setting)
Note:
• REMOTE is available for the external control. The
RC8001SR cannot operate the function.
5.
Select desired input source with the
3
or
4
cursor buttons.
6.
Set to “ON” or “OFF” with the
1
or
2
cursor
buttons.
7.
After you complete this portion of the setup,
move the cursor to “RETURN” with the
3
or
4
cursor button and press the OK/ENTER
button.
Note:
• When an input source that is on in the set room is
selected, voltage is output to the DC TRIGGER
output terminal.