Magellan NAV 6500 - Manual (Page 27)

Magellan NAV 6500/NAV 6510 19
NAV 1 Screen
From the Map Screen, press Nxt Scrn to access the NAV 1
screen
At the top of the NAV 1 screen is the destination waypoint (if
any), and current GPS status, the current position coordi-
nates and datum, the time and date. The position coordi-
nates are based on the setup datum, which you may select
under Navigation Setup.
The letter “D“ for differential appears next to the GPS status
if the last computed fix is differentially corrected (see DGPS
in Appendix).
The two large center windows display Distance to Go (DTG),
Bearing (BRG), Speed over Ground (SOG), Course over
Ground (COG), Velocity made good (VMG), and how many
degrees and direction to turn (TRN).
The bottom of the screen displays Time to Go (TTG),
Estimated Time of Arrival (ETA ), and Course Deviation In-
dicator (CDI). The boat icon on the CDI points in the direc-
tion of COG with respect to Bearing (BRG).
The active softkeys are Aux,Waypts, Routes, MapScrn and
Nxt Scrn.
Press MapScrn to return to the Map screen or Nxt Scrn to
switch to the Nav 2 screen.
NAV 2 Screen
From the NAV 1 screen, press Nxt Scrn to access the NAV 2
screen.
Aux Waypts Routes NxtScrn
TTG:00:58:13 ETA:10:17:18
MapScrn
L4.0 n m R4.0 n m
DTG 6.7 Nm
SOG 7.0 Kts
VMG 6.5 Kts
BRG 22` M
COG 359` M
TRN R 23`
Jan/19/96
09:19:05AM
34`06 ' 35 " N
117`49 ' 34 " W
TO HOTSPOT
GPS Fix D
WGS84
Aux Waypts Routes NxtScrn MapScrn
SOG
7.0
Kts
DTG
6.7
Nm
XTE
L3.0
Nm
L4.0 n m R4.0 n m
COG 359` M
CTS 45` M
STR R 46`
TO HOTSPOT GPS Fix D
At the top of the screen the name of the destination waypoint
(if any) and the current GPS status are displayed. If the last
computed fix is differentially corrected, the letter D appears.