Magellan NAV 6500 - Manual (Page 51)

Magellan NAV 6500/NAV 6510 43
CDI Scale 0.5 Nm
Distance Units Nm
Speed Units Kts
Depth Units Ft
Alarm Activated ON
Arrival Radius OFF
Anchor Alarm OFF
XTE Alarm OFF
Test Alarm OFF
Setting Projected Course
The position of the boat can be projected ahead in time based
on current COG and SOG. The projected course is repre-
sented by a solid line extending from the boat in the direction
of its COG and terminated with an .
Press the Aux softkey, use the CURSOR
KEY to highlight Navigation Setup and
press ENTER. Use the CURSOR KEY to
highlight Projected Course and press EN-
TER. The course can be projected ahead
over 2 min., 10 min., 30 min., 1 hour, or
2 hours. Use the CURSOR KEY to highlight and EN-
TER to accept. Press ESC to exit.
Default setting: OFF
and press ENTER.
Use the CURSOR KEY to highlight one of the following
parameters: BRG, COG, CTS, Drift, DTG, SOA, Set,
SOG, STR, TRN, VMG, XTE. Press ENTER to accept.
Use the same procedure to change as many parameters as
you wish. Press ESC twice to exit.
Default settings: SOG, DTG, XTE, COG, CTS, STR
CDI/Units/Alarms Function
This menu allows you to set CDI scale, choose distance, speed
and depth units, and set alarms for arrival radius, anchor, cross
track error and test.
OFF
2 min.
10 min.
30 min.
1 hour
2 hours
Nav2 Screen Setup
BRG
COG
CTS
Drift
DTG
SOA
Set
SOG
STR
TRN
VMG
XTE
NAV 2 Screen Setup
The NAV 2 screen can be customized to display six different
navigation parameters chosen from a list of 12.
Press the Aux softkey, use the CUR-
SOR KEY to highlight Navigation
Setup and press ENTER. Use the
CURSORY KEY to highlight Nav
2 Screen Setup and press ENTER.
Use the CURSOR KEY to select
the parameter you wish to change