Magellan NAV 6500 - Manual (Page 76)

Magellan NAV 6500/NAV 6510 68
WPT001
WPT002
WPT003
WPT004
Press Remove . WPT002 is
removed from the route but
is still displayed on the
screen. The route has been
reconfigured, starting at
WPT001, to WPT004, and
ending at WPT003.
Activating a Route. A route can be activated from the route
list.
From any root screen press the Routes, List softkeys. The
route list appears, containing up to twenty-five routes you
have created. Use the CURSOR KEY to scroll to additional
pages, if any.
Highlight the route you wish to activate and press the Activte
softkey.
Only one route can be activated at a time. Activat-
ing a route automatically deactivates the previous
active route.
An arrow appears next to the number of the activated route
in the list, and a window appears briefly: “Route x is the ac-
tive route.” The display returns to the route map screen, show-
ing the activated route.
Deactivating a Route. An activated route can be deactivated
from the route list.
From any root screen press the Routes, List softkeys.
The activated route is shown by an arrow next to the route
number in the list. Use the CURSOR KEY to highlight the
route to be deactivated, and press the Deactiv softkey.
The arrow next to the route number in the list disappears.
The selected route has been deactivated. When you return to
the map screen, the deactivated route is no longer shown.