Magellan NAV 6500 - Manual (Page 75)

Magellan NAV 6500/NAV 6510 67
Press
Insert
. As you be-
gin moving the cursor, two
dashed lines are displayed
showing how the route is be-
ing changed.
WPT001
WPT002
WPT003
When you are satisfied with
the location of the cursor, press
ENTER . If there is an existing
waypoint at that position, it
will be used in the route, if not,
the Insert Waypoint window
will be displayed. This win-
dow behaves like the other Creating Waypoint windows pre-
sented in this tutorial. However, as in the previous example,
the coordinates cannot be changed.
WPT001
WPT002
WPT003
WPT004
WPT001
WPT002
WPT003
WPT004
Pressing
Done
accepts
the new waypoint and
the route now resembles
the one at the right.
Removing a Waypoint. Another common editing function
is removing a waypoint from a route. Move the cursor to the
waypoint to be removed from the route. (Please note that the
waypoint is not removed
from the receiver’s memory,
but only from this route.)
Insert Waypoint
Name: Type:
Description: 01/25/96 19:00
34`49.75 N
139`05.76 W
WPT004