Magellan NAV 6500 - Manual (Page 42)

Magellan NAV 6500/NAV 6510 34
If you want to add an existing waypoint to the
route, you must still move the cursor near the
course line, activate the Insert softkey, then move
the cursor to the waypoint to insert and press
ENTER.
When you have finished, press the Done softkey.
The inserted waypoint appears at the position you placed
it on the map. Press Done to exit Route Edit.
Removing a Waypoint from a Route
Routes List
Highlight
route
ENTER
Move cursor to the waypoint
in the route to be removed
Remove
From any NAV screen, press Routes, List softkeys.
Use the CURSOR KEY to highlight the route in which
you wish to delete a waypoint and press ENTER.
To edit the active route a shortcut is to press
Routes, Edit.
Use the CURSOR KEY to place the cursor over the
waypoint in the route that you wish to remove.
Press the Remove softkey.
The waypoint is removed from the route, however it con-
tinues to exist as a waypoint in the waypoint list and on
the map.
Press Done to exit Route Edit.
Appending a Waypoint to the End of a Route
Routes List
Highlight
route
ENTER
Move cursor to the position
at which you wish to append
ENTER
If chosen point is not an existing waypoint, a window will be
displayed to create a new waypoint for that position.
From any NAV screen, press the Routes, List softkeys.
Use the CURSOR KEY to highlight the route in which
you wish to append a waypoint to the end and press EN-
TER.
To edit the active route a shortcut is to press
Routes, Edit.