Magellan NAV 6500 - Manual (Page 52)

Magellan NAV 6500/NAV 6510 44
Selecting CDI Scale
The scale (maximum offset) of the CDI displayed on the
Nav 1 and Nav 2 screens can be set to 0.2, 0.5, 1.0, 2.0, 4.0,
10.0 distance units (Nm, Mi, or Km depending on the dis-
tance units setting).
Press the Aux softkey, highlight CDI/Units/
Alarms and press ENTER, highlight CDI Scale
using CURSOR KEY, press ENTER.
Use the CURSOR KEY to select desired scale
and press ENTER. Press ESC to exit.
Default setting: 0.5
Setting Distance Units
Distance units can be set to Nautical Miles, Statute Miles, or
Kilometers.
Press the Aux softkey, use the CURSOR KEY to
highlight CDI/Units/Alarms and press ENTER.
Use the CURSOR KEY to highlight Distance
Units and press ENTER.
Use the CURSOR KEY to select desired units and press
ENTER. Press ESC to exit.
Default setting: Nautical miles (Nm)
Setting Speed Units
Speed units can be set to Knots, Miles Per Hour, or Kilome-
ters Per Hour.
Press the Aux softkey, use the CURSOR KEY to
highlight CDI/Units/Alarms and press ENTER.
Use the CURSOR KEY to highlight Speed Units
and press ENTER.
Use the CURSOR KEY to select desired units and press
ENTER. Press ESC to exit.
Default setting: Knots (Kts)
Setting Depth Units
Depth units can be set to Feet, Fathoms or Meters.
Press the Aux softkey, use the CURSOR KEY to
highlight CDI/Units/Alarms and press ENTER.
Use the CURSOR KEY to highlight Depth Units
and press ENTER.
Use the CURSOR KEY to select desired unit and press
ENTER. Press ESC to exit.
Default setting: Feet (Ft)
Nm
Mi
Km
Kts
Mph
Kph
Ft
FM
m
0.2
0.5
1.0
2.0
4.0
10.0