Marantz DV7600 - Manual (Page 26)

Playing Discs 5
26
Making a program list
This feature lets you program the play order
of tracks on a disc. You make a program list
via display on the front panel, using the
number buttons to enter tracks.
Note that programmed playback is not
available for DVD.
To check the programmed content
In the stop mode, press the cursor buttons
(
5/∞) repeatedly.
The programmed content (program number,
track number and playback time) will be
shown on the display in the programmed
order.
To delete a programmed track
In the stop mode, press the cursor buttons
(
5/∞) repeatedly until the programmed
track to be deleted is displayed. Then press
the CLEAR button. The selected track is
deleted from the program and the track
programmed next is moved to take its place,
and is shown on the display.
To overwrite a programmed track
In the stop mode, press the cursor buttons
(
5/∞) repeatedly until the programmed
track to be changed is displayed. Select a
new track number using the number buttons,
and then press the ENTER button.
To add a track to the end of the
program
In the stop mode, press the cursor button
(
5) repeatedly until “--” is displayed. Select
a track number using the number buttons,
and then press the ENTER button. The track
is added to the end of the program.
To resume normal playback
In the stop mode, press the PROGRAM
button to resume normal playback. The
“PROG.” indicator will go off and the pro-
gram mode will be cancelled.
However, the programmed content isn’t lost.
You can return to the programmed playback
by pressing the PROGRAM button in the
STOP mode and the
3 (PLAY) button.
To clear the programmed content
With the unit stopped and the “PROG.”
indicator lit, press the CLEAR button to
clear the programmed content.
If one of the following buttons is pressed,
the programmed content will also be
cleared:
OPEN/CLOSE , POWER
Use to 32 tracks can be programmed in the
desired order.
1 Press the PROGRAM button in the stop
mode.
2 Press the number buttons to select a track.
Example:
To select Track No.3, press 0 and3.
3 Press the ENTER button.
The track is programmed.
Repeat steps 2 and 3 to program more tracks.
Track No. Program No.
4 When the selection of track numbers has
been finished, press the 3 (PLAY) button
to start programmed playback.
• If you press the REPEAT button and select
“REPEAT ALL”, the programmed tracks will be
played repeatedly.
• During programmed playback, the number
buttons don't work.