Marantz DV7600 - Manual (Page 28)

Playing Discs 5
28
Playing JPEG
1 When a JPEG disc is loaded, directories will
be shown on the screen.
PLAY MODE : Folder
0640 1
0641 2
0642 3
0643 4
0644 5
0645 6
ROOT 0
FOLDER2
FOLDER3
FOLDER4
FOLDER5
FOLDER1
2 Select a directory by pressing the cursor
buttons (
5/∞/2/3) and press the 3
(PLAY) button or ENTER button.
3 File names will appear on the screen. Select
the desired file by pressing the 5/∞ or
number buttons of the remote control and
press the
3 (PLAY) button. Slide show will
start from the selected file.
Note
• Some files on the JPEG disc may be distorted
during playback due to the configuration or
characteristics of the disc.
• Please refer to “Caution” on page 9.
1) How to pause the display
Press 8 (PAUSE) button. To start playback,
press 3 (PLAY) button.
2) How to cue a still image to be displayed
Press the SKIP ( ¢ (NEXT)) button to
proceed to the next still image and press the
SKIP (
4 (PREV.)) button to return to the
previous still image.
3) Changing the orientation of a still image
• Press the cursor button ( 3) to rotate the image
clockwise 90 degrees.
• Press the cursor button ( 2) to rotate the image
counter-clockwise 90 degrees.
• Press the cursor buttons ( 5) to flip the image
from top to bottom by 180 degrees.
• Press the cursor button ( ∞) to flip the image
from right to left by 180 degrees.
4) Zoom playback
To zoom, press the ZOOM button during
playback.
• Each time the ¡ (FF) button, the magnifica-
tion level changes.
• Each time the
1 (REV) button, the reduction
level changes.
Note
• The picture is rendered in Still mode while
zooming.
• Zoom play cannot be used on some discs.
• Zoom will not operate properly for some
scenes.
• The Setup Key does not operate during
thumbnail display.
Video Adjust
You can set the picture settings you desire and
store them in the player’s memory.
Selecting a preset
1 Press the VIDEO ADJ. button on the re-
mote control.
2 Select “Memory Select”.
3 Use the cursor buttons (
2/3) to select a
preset, and press ENTER button.
Memory Select Standard
Setup
Video Adjustment
• Standard – optimized settings for a standard
television set
• Memory 1, 2, 3 – User presets (see below for
more on these)
You can highlight a preset while a disc is playing
(before you press ENTER to select it) to see the
effect on the picture immediately.
Note
• Depending on the disc and your TV/monitor,
the effect of these settings may not be clear.