Marantz DV7600 - Manual (Page 35)

6 DVD Setup Menu
35
English
TV System
• Default setting: MULTI
The default setting of this player is MULTI,
and unless you notice that the picture is
distorted when playing some discs, you
should leave it set to MULTI.
If you experience picture distortion with
some discs, set the TV system to match your
country or region’s system. Doing this,
however, may restrict the kinds of disc you
can watch. The table below shows what
kinds of disc are compatible with each
setting (MULTI, PAL and NTSC).
Disc Output format
Type Format Position of TV SYSTEM
NTSC PAL MULTI
DVD NTSC NTSC PAL NTSC
PAL NTSC PAL PAL
Video CD/ NTSC NTSC PAL NTSC
Super VCD
PAL NTSC PAL PAL
Super Audio NTSC PAL NTSC
CD
CD, No disc NTSC PAL NTSC/PAL
Note
• When the selected format is changed to a
different format from the TV format in which a
program was recorded, the picture may become
jerky and the upper and lower parts of the
screen may disappear. The above setting should
be specified to match the format of your own
TV.
Slide show Mode
• Default setting: Random
When a JPEG file is played, you can enjoy
twelve slideshow effects.
Press the ENTER button to select the desired
mode from the following:
TYPE 1-11
TYPE 1 : wipes from top to bottom
TYPE 2 : wipes from bottom to top
TYPE 3 : wipes from top/bottom to center
TYPE 4 : wipes from center to top/bottom
TYPE 5 : vertical blinds
TYPE 6 : wipes from left to right
TYPE 7 : wipes from right to left
TYPE 8 : wipes from left/right to center
TYPE 9 : wipes from center to left/right
TYPE 10 : wipes from edge to center
TYPE 11 : horizontal blinds
Random
Wipers randomly
None
No effect
Angle Mark
• Default setting: On
Select whether the angle message appears on the
TV screen or not when a multi-angles scene is
being played. You can change the angles using the
ANGLE button.
Note
• To switch on/off the Angle Mark on the Setup
Menu, the screen starts from Muti-Angle
starting position.