Marantz DV7600 - Manual (Page 41)

6 DVD Setup Menu
41
English
Audio Out
• Default setting: 2 Channel (Stereo)
If you connected this player to your amplifier using
the 5.1 channel analog outputs (front, surround,
center and subwoofer outs), set this to 5.1
Channel; if you connected only the stereo
outputs, set to 2 Channel (Stereo).
• 2 Channel (Lt/Rt)
Used to specify that DTS multi-channel input
or Dolby Digital multi-channel input is to be
downmixed into a format compatible with the
Dolby Surround matrix format. This option may
be selected to enjoy surround sound when the
player is connected to Dolby Surround-
compatible AV amplifier.
• TruSurround
If you connected your DVD player using only
the stereo analog outputs, you can simulate
surround sound.
Note
• Works with DVD-Video and VCD only.
• The digital audio output is processed by
TruSurround when playing 2 channel Dolby
Digital DVDs or Video CDs with TruSurround. It
is recommended that Audio Out is set to 2
channel (stereo or Lt/Rt) when connecting
the player to your amp using a coaxial or
optical connection.
• How good the surround effect is varies with the
disc.
• When TruSurround is selected, the audio can
be output only for the L/R channels on the
Front.
SRS TruSurround
SRS TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.
Note
• Even if you set Audio Out to 5.1 Channel,
you’ll only get sound from all speakers when
playing a multi-channel DVD-Audio disc, multi-
channel Super Audio CD disc, Dolby Digital or
DTS encoded DVD disc.
• Set Digital Out (page 39) to Bitstream for
Dolby Digital and DTS 5.1 channel analog
output.
• Set Digital Out (page 39) to Off for DVD
Audio 192/176.4/96/88.2 kHz Hi Sampling
and 5.1 channel analog output.
• When you set it to 5.1 Channel, the overall
output level may sound quieter than when set
to 2 Channel (Stereo, Lt/Rt) or TruSurround.
• If you set to 2 Channel (Stereo), 2 Channel
(Lt/Rt), TruSurround, Dolby Digital and DTS
are mixed down to two channels so you still
hear all the audio recorded on the disc.
• Some DVD-Audio discs don’t allow down-
mixing of audio. These discs always output
multi-channel audio regardless of the setting
made here.
• Change can be made only in the stop mode.
When RESUME is indicated on the display, put
the player in the STOP mode by pressing
7
(STOP) button.