Additional information 7 – Marantz DV7600 User Manual

Page 54

Advertising
background image

Additional Information

7

54

The disc containing the MP3 tracks won’t play.

• If the disc is a recordable CD, make sure that the disc is

finalized.

Check that the track(s) are in the MPEG1 Audio Layer
3 format.

Check that the sampling rate of the track(s) are 44.1
or 48kHz.

Some MP3 tracks appear to be missing from a disc.

• If a track name does not end in “.mp3” or “.MP3”, this

player will not recognize it as an MP3 track.

• This player only recognizes about 250 files on a disc. If

there are more titles than this, you will not be able to play
them.

• This player is not compatible with multi-session discs. If

the disc is multi-session, you will only be able to play
tracks recorded onto the first session.

Noticeable difference in DVD and CD volume.

• DVDs and CDs use different recording methods. This is

not a malfunction.

Cannot play multi-channel audio.

• Make sure that 5.1 Channel is selected in the Audio Out

menu (pages 41-42).

• Check that the settings in the Speaker Setting screen are

correct (page 43).

• Check the audio options available from the disc’s menu.

No digital audio output.

• Check that Digital Out setting is set to Bitstream/PCM

(page 39).

• Some DVD-Audio discs prohibit digital audio output.

• No digital audio is output when playing Super Audio CDs.

Cannot output 192kHz or 176.4kHz digital audio.

• The player does not output digital audio at these

sampling rates.

• Only 48/44.1 kHz output is available when HDMI is

connected.

Cannot output 96kHz or 88.2kHz digital audio.

• Check that the PCM Down Sample setting is not set to

On (page 40).

• Some discs are digital copy protected and do not output

high sampling rate digital audio.

• Only 48/44.1 kHz output is available when HDMI is

connected.

No DTS audio output.

• If this unit is connected to a non-DTS compaible amplifier

or decoder using a digital audio cable, set Digital Out to
PCM in the Setup menu. If you do not do this, noise will
be output if you try and play a DTS disc.

• If this unit is connected to a DTS-compatible amplifier or

decoder using a digital audio cable, check the amplifier
settings, and that the cable is properly connected.

• If a TV or projector compatible with PCN only is con-

nected when HDMI is connected, DTS will not be
available.

Audio mix does not sound right or sounds incom-
plete (for example, inaudible dialog).

• Incorrect Setup menu settings.

Make sure that 2 Channel output is selected for the
Audio Out menu option if you've connected to the
stereo inputs on your amplifier or TV (pages 41-42).

• If the power is switched off before exiting the Setup

menu, the settings are not stored.

Make sure that you exit the Setup menu after changing
any settings before switching off.

Advertising