Muratec Fax Machine - Manual (Page 135)

Setting the speed for Macros
You can adjust the speed of one step in the Macro key.
1 Press MACRO PROGRAM , NEXT , [Setting].
2 Select desired speed for Macros using the cur-
sor key.
3 Press [Enter] to save the setting.
Copying or fax dialing with the Macro key
To copy or dial a fax call using a Macro key:
1 Insert the document.
2 Select resolution and contrast.
3 Press the Macro key in which you’ve stored the command.
Note: You can also select the command from the Macro key list:
Press MACRO PROGRAM . Select the command using the cursor key.
Then press [Action].
4 Press START , if you have not registered START in the Macro key.
5 The programmed command will start.
Common Settings
Getting Started
Common settings
4.5