Muratec Fax Machine - Manual (Page 83)

Advanced fax
Printing a communication result
Your machine can print the individual communication result in the list of Comm.
Result.
1 Press JOB REVIEW & COMM CANCEL .
2 Select “Comm. Result” and then press [Enter].
3 Select the command you want to print and
press [Detail]. The
LCD will show:
Note: Press [Detail] again to return to the
previous display.
4 Press [List].
The communication result for that command
will be printed.
To print all communication results, that is, an activity journal, press MENU , G ,
[Report].
Note: You can set your machine to print an activity journal automatically. See
“Setting the Activity journal” on page 3.40 for more detail.
View the reserved printing jobs for out-of-paper
reception
You can confirm the reserved printing jobs for out-of-paper reception.
Note: For more information of out-of-paper reception, see page 3.8.
To see the reserved printing jobs:
1 Press JOB REVIEW & COMM CANCEL .
Note: The number next to “Out-of-paper Rx
Wait” signifies how many printing jobs
for out-of-paper reception are reserved.
If the number is “000”, it means there
are no reserved jobs. Your machine can
store up to 250 out-of-paper receptions
in its memory.
2 Select “Out-of-paper Rx” and then press
[Enter]. The list of Out-of-paper Rx will
appear.
It will be indicated by assigned numbers, time
when the document was received, and remote
location’s names or numbers.
Note: The assigned number identifies the
order in which the documents were received by your machine.
3 Use the cursor key to scroll through items.
If you wish to exit this mode, press RESET .
View the reserved copy jobs
You can confirm the reserved copy jobs.
To see the reserved copy jobs:
1 Press JOB REVIEW & COMM CANCEL .
Note: The number next to “Reserved Copy”
signifies how many copy jobs are
reserved. If the number is “000”, it
means there are no reserved jobs.
2 Select “Reserved Copy” and then press
[Enter]. The list of Reserved Copy will appear.
It will be indicated by assigned numbers, time
when operated for the copy job, and state for
each job.
Note: The assigned number identifies the
order in which the copy jobs will be
done.
3 To exit this mode, press RESET .
3.31
F
ax F
eatures
Getting Started