Muratec Fax Machine - Manual (Page 22)

2.2
Basic copy
Scanning the document
When scanning the document(s) using the ADF
1 Set your document in the ADF (automatic document feeder).
(See “How to set the document,” page 1.19.)
2 Set any setting you want.
3 Press START .
Normally, the LCD will show (see right) and
start copying after scanning the document.
However....
When you set the sort, combine, duplex or book-
let function, the
LCD shows as shown right.
In this case, you can set different document(s)
for copying after finish the currently scanning.
If you want to scan a different document:
(1) Press [Yes] during the machine is scanning
the current document.
(2) After scanning the first document(s), set
next document in the ADF or FBS and then
press [Start]. The machine will start scan-
ning the next document(s).
If you want to scan more document(s), repeat step (1)–(2).
Note: You can set the next document on the FBS glass to scan it (see right
column).
(3) After scanning all pages of your document, press [End].
The machine start printing the scanned documents.
When scanning the document using the FBS (Flatbed scanner)
Note: The machine gives priority to the document on the ADF to make a copy or
send a fax, when the documents are set both on the ADF and FBS glass.
1 Set your document on the FBS glass.
(See “How to set the document,” page 1.19.)
2 Set any setting you want.
3 Press START .
Normally, the LCD will show (see right) and
start copying after scanning the document.
However....
When you set the sort, combine or duplex func-
tion, the
LCD appears as shown right.
In this case, you can set different documents for
copying after finishing the current scanning.
(1) After scanning the first page of your docu-
ment, remove the first page and then set the
next page of your document on the
FBS glass
or ADF .
Note: You can use the ADF to scan the next
document (see left column).
(2) Press [Start]. The machine will start scanning the next page of your docu-
ment.
If you want to scan more documents, repeat step (1)–(2).
(3) After scanning all pages of your document, press [End].
The machine will start printing the scanned documents.