Muratec Fax Machine - Manual (Page 138)

Common settings
F. Auto power off mode
Your machine is initially set to be in the Auto power off mode automatically when
the machine keeps to be in the Sleep mode for 60 minutes. If you want to change the
time or to set the Auto power off mode to OFF, you can set it here.
Note: Pressing ENERGY SAVING for 3 seconds, your machine will be in the Auto
power off mode immediately, regardless of this setting.
1 Press MENU , [Mach Set].
2 Select “F. Auto Power Off Mode” using the
cursor key. Then press [Enter].
3 Select “ON” or “OFF” using the cursor key.
Then press [Enter].
Note: If you set it to OFF, your machine will return to standby mode.
4 Enter the time for the Auto power off mode
using numeric keypad.
(30 - 120 min.)
Note: Your machine will be in the Auto power
off mode when the time you set has
passed after the Sleep mode starts.
5 Press [Enter].
G. Adjust the sound settings
You can adjust or change the following sounds:
• Fax Ringer — If you set this to “ON”, the ringer that alerts you when you
receive a fax will be active even if you do not have the optional handset.
Note: This setting is not available in Fax/Tel ready mode.
• Volume — You can adjust the volume for fax ringer, alarm, key touch tone and
complete beep.
• Key Touch Tone — You can select the key touch tone for each mode, fax mode
and copy mode.
Note: When the optional scanner kit or network kit are installed to your
machine, you can also select the tones for them.
• Complete Beep — You can select the type of beep that alerts you when copy
printing, fax transmission/reception or fax printing were completed.
• Paper Jam Alarm — If you set this to “OFF”, your machine will not sound an
alarm when the paper jam occurs.
Note: The alarm light will glow and the
LCD will show the error message,
regardless of this setting.
1 Press MENU , [Mach Set].
2 Select “G. Sound Settings” using the cursor
key. Then press [Enter].
3 Select the desired setting using the cursor key,
and then press [Enter].
Fax Ringer — go to step 4.
Volume — go to step 5.
Key Touch Tone — go to step 6.
Complete Beep — go to step 8.
Paper Jam Alarm — go to step 10.
4.8