IBM 2274 - Manual (Page 135)

General Information 101
NOTE: Installing the processor
• Place the ZIF socket release lever to the release
(up) position.
• Insert the new processor, matching the notched
corner of the processor with the pin 1 indicator on
the socket.
• Push down the lever to lock the processor to the
socket.
• Place the processor heat sink fan over the
processor
• Insert one side of fan brace onto the ZIF socket.
• Secure by latching the other side to the ZIF socket.
• Reconnect the processor fan sink cable to the
connector FN1 on the system board.