IBM 2274 - Manual (Page 49)

General Information 15
The following table lists specific keys on the keyboard
that will help you move through the Configuration/
Setup Utility Menus:
Changing Parameter Settings
In the Configuration/Setup Utility Menus, the
configuration information that you can change is
enclosed in brackets like these: [ ]. You cannot
change any information that is not enclosed in
brackets. Use the up- or down- arrow keys to
highlight options then press Enter to display a menu.
When changing the setting of a particular parameter,
highlight the setting then use the left- or right- arrow
key to change the setting. Refer to the Configuration/
Setup Utility help for details on the configurable
parameters in each menu.
Keys Function
Down- or up-
arrow key Use these arrow keys to highlight
an option on the menu. (Press the
Enter key to choose the option.)
Left- or right-
arrow key Use these arrow keys to make a
selection and change an option's
setting. On some menus, you can
use these keys to move from one
field to another.
F1 Press this key if you want help for a
selected menu option.
Esc After viewing or making changes to
the settings on a menu, press this
key to exit the menu.
Enter Press this key to choose a
highlighted option from a menu
F10 Press this key if you want to save
the current settings for a line
F7 Press this key if you want to load
the factory default settings from the
selected brackets.
F5 Press this key if you want to restore
item previous setting