IBM Partner Pavilion Remote Supervisor Adapter - Manual (Page 15)

Table 1. Actions available when logged in to a Remote Supervisor Adapter or when logged in to the ASM processor
in an xSeries 330 server (continued)
Link Action Description
Network Interfaces Configure the network interfaces
of the Remote Supervisor Adapter You can configure network-access settings to the Remote
Supervisor Adapter from the Network Interfaces page,
which is available only when you log in to the Remote
Supervisor Adapter. The Remote Supervisor Adapter
supports both Ethernet and point-to-point protocol (PPP)
connections, enabling remote access using a Web browser
or Telnet application.
Network Protocols Configure the network protocols of
the Remote Supervisor Adapter You can configure Simple Network Management Protocol
(SNMP), Domain Name System (DNS), and Simple Mail
Transfer Protocol (SMTP) settings used by the Remote
Supervisor Adapter from the Network Protocols page,
which is available only when you log in to the Remote
Supervisor Adapter.
Remote Control
Keys Transmit special key combinations During server console redirect and remote POST,
keyboard support is limited to ASCII characters, the arrow
keys, and the F1 through F12 function keys. To transmit
certain special key combinations, you must type the
default prefix key combination or a user-defined prefix key
combination, followed by a second key, as described in the
special keys table.
Configuration File Back up and restore the Remote
Supervisor Adapter configuration You can back up, modify, and restore the configuration of
the Remote Supervisor Adapter from the Configuration File
page.
Restore Defaults Restore the Remote Supervisor
Adapter or ASM processor
defaults Attention: When you click Restore Defaults, all of the
modifications you made to the Remote Supervisor Adapter
or ASM processor are lost.
You can reset the configuration of the Remote Supervisor
Adapter or ASM processor to the factory defaults.
Restart ASM Restart the Remote Supervisor
Adapter or ASM processor You can restart the Remote Supervisor Adapter or ASM
processor.
Log Off Remote
ASM Log off a remote
system-management processor or
adapter
1
You can log off your connection to the
system-management processor or adapter
1 on the ASM
interconnect network and return to the Remote Supervisor
Adapter that originated the remote session.
Log off Log off the Remote Supervisor
Adapter You can log off your connection to the Remote Supervisor
Adapter.
1 System-management processors and adapters are Remote Supervisor Adapters, ASM processors, ASM PCI
adapters, and integrated system management processors (ISMPs). These system-management processors and
adapters are also known as service processors.
You can click the View Configuration Summary link, which is available on most
pages, to quickly view the configuration of the Remote Supervisor Adapter or ASM
processor.
Remote Supervisor Adapter action descriptions in xSeries 330 servers
Table 2 on page 10 lists the actions available when you are logged in to the Remote
Supervisor Adapter installed in an xSeries 330 server.
Note: When you are logged in to a Remote Supervisor Adapter installed in an
xSeries 330 server or an ASM processor in an xSeries 330 server, the link
Chapter 2. Opening and using the ASM Web interface 9