IBM Partner Pavilion Remote Supervisor Adapter - Manual (Page 38)

8. If you are logged in to an ASM processor: Select the Dedicate to ASM
check box to reserve serial port 1 for the ASM processor. This option is
displayed only when you are logged in to an ASM processor.
If shared with the operating system, the serial port serves the ASM processor
only when the server is turned off or during the power-on self-test (POST). The
operating system can access it after the POST is completed. The ASM
processor takes over the serial port from the operating system to dial out and
transmit an alert only after a critical event. The port then remains under ASM
processor control until the server is restarted.
9. Click Save.
10. If you need to set advanced settings, click Advanced Modem Settings. A
window similar to the one in the following illustration opens.
Set these values only if the alert forwarding functions are not working properly.
The strings marked with an asterisk (*) require a carriage return (^M) to be
manually entered at the end of the field value.
The following table describes the initialization strings for this modem.
Table 7. Port 1 settings
Field What you type
Initialization
string Type the initialization string that will be used for the specified modem. A
default string is provided (ATE0). Do not change this string unless your
dial-out functions are not working properly.
Dial prefix string Type the initialization string that is used before the number to be dialed.
The default is ATDT.
32 Remote Supervisor Adapter: User’s Guide