IBM Partner Pavilion Remote Supervisor Adapter - Manual (Page 62)

Server power and restart activity
The Server Power and Restart Activity section displays the power status of the
server when the Web page was generated.
Power The Power field shows the power status of the server at the time this Web
page was generated.
State The State field shows the state of the server when this Web page was
generated. Possible states include:
v System power off/State unknown
v In POST
v Stopped in POST (Error detected)
v Booted Flash or System partition
v Booting OS or in unsupported OS (Could be in the operating system if
the operating system or application does not report the new system
state)
v In OS
v CPUs held in reset
v System power on/Before POST
Restart count
The Restart count field shows the number of times the server has been
restarted.
Note: The counter is reset to zero each time the ASM subsystem is
cleared to factory defaults.
Power-on hours
The Power-on hours field shows the total number of hours the server has
been powered on.
56 Remote Supervisor Adapter: User’s Guide