IBM Partner Pavilion Remote Supervisor Adapter - Manual (Page 20)

Setting system information
Complete the following steps to set your Remote Supervisor Adapter system
information:
1. Log in to the Remote Supervisor Adapter where you want to set the system
information. For more information, see Chapter 2, “Opening and using the ASM
Web interface” on page 3.
For an xSeries 330 server: To set the system information for the ASM
processor, log in to the ASM processor. For more information, see “Logging in to
the ASM processor in an xSeries 330 server” on page 6.
2. In the navigation pane, click System Settings. A window similar to the one in
the following illustration opens.
Note: The available fields in the System Settings page are determined by the
accessed remote server.
3. In the Name field in the ASM Information section, type the name of the Remote
Supervisor Adapter or ASM processor.
Use the Name field to specify a name for the Remote Supervisor Adapter in this
server. The name is included with e-mail, SNMP, and alphanumeric pager alert
notifications to identify the source of the alert.
Note: Your Remote Supervisor Adapter name (in the Name field) and the IP
host name of the Remote Supervisor Adapter (in the Host Name field on
the Network Interfaces page) do not automatically share the same name
because the ASM Name field is limited to 15 characters. The Host
Name field can consist of up to 63 characters. To minimize confusion, set
the ASM Name field to the nonqualified portion of the IP host name. The
nonqualified IP host name consists of up to the first period of a fully
qualified IP host name. For example, for the fully qualified IP host name
asmcard1.us.company.com
, the nonqualified IP host name is asmcard1.
For information about your host name, see “Configuring an Ethernet
connection to the Remote Supervisor Adapter” on page 34.
14 Remote Supervisor Adapter: User’s Guide