IBM Partner Pavilion Remote Supervisor Adapter - Manual (Page 65)

2. In the navigation pane, click Remote Boot.
3. Click Remote Booting From a Diskette Image.
4. Select the diskette image file.
5. Click Boot Server. After the file transfer is complete, a confirmation window
opens.
6. Click Continue in the confirmation window to start the server using the
transferred image.
Remote control
From the Remote Control page, you can:
v View and interact with the server console
v Restart the server and view the POST
v View a Windows blue screen capture
Note: This feature is not available on all servers.
You must log in to the Remote Supervisor Adapter with a user ID that has
read/write access to use any of the remote control features. You must also know
the remote control password, which is configured locally on the server in the BIOS
setup menu (accessed by pressing F1 in POST). After the password is accepted,
you gain access to the server desktop. You do not need the remote control
password to view the blue screen capture.
Notes:
1. You can have only one remote control session functioning at a time.
2. The keystroke events sent by the remote client are not received by 16-bit
applications (for example, EDIT.COM or DEBUG.COM) running on the Windows
NT or Windows 2000 operating system.
Accessing the server graphical console
Click Redirect Server Console to view an interactive graphical user interface (GUI)
display of the server. You see on your monitor exactly what you see on the server
desktop, and you have keyboard and mouse control of the desktop.
Notes:
1. For best performance, set the server desktop to the following settings:
v Supported resolutions: 640 x 480 pixels, 800 x 600 pixels (preferred), and
1024 x 768 pixels
v Supported color depths: 256 colors, 65536 colors (preferred), and 32-bit color
2. Mouse control is supported on the Microsoft Windows NT, Microsoft Windows
2000, Red Hat Linux (version 7.1 or later), and SuSE Linux (version 7.2 or later)
operating systems. Red Hat Linux and SuSE Linux support is limited to
distributions that are listed in the readme.txt files included with the Remote
Supervisor Adapter device driver for these operating systems.
3. Redirect server console is not supported in full screen text mode under
Windows.
Complete the following steps to remotely access a server graphical console:
1. Log in to the Remote Supervisor Adapter. For more information, see Chapter 2,
“Opening and using the ASM Web interface” on page 3.
2. In the navigation pane, click Remote Control.
Chapter 5. Performing Remote Supervisor Adapter tasks 59