Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 112)

5-8 PRO/100 LAN+Modem PC Card User’s Guide
If the communications program is already installed, you are installing a
new modem, or your modem is not functioning, follow the instructions
for your application.
Modem Setup After Windows 95 Installation
1 Install the PRO/100 PC Card according to the instructions in
Chapter 2. Windows 95 Installation.
2 Verify modem settings as follows:
a Go to Control Panel.
b Double-click the Modem icon.
c Highlight the EtherExpress PRO/100 LAN+Modem PC Card.
d Click Properties.
e Note the Communications Port assigned to the Intel adapter
under the General tab.
f Accept the default or set the Maximum Speed of the modem.
g Use the default initialization string or modify it by clicking the
Connection Tab, then Advanced, and inputting changes on the
Extra Settings line.
3 Verify that the modem is functioning via Modem Diagnostics and
Hyperterminal.
4 Install the communications program. The Intel modem is automati-
cally configured by the communications program, if the modem is
installed prior to the communications program. During the installa-
tion process, you will be prompted to verify the Modem selection,
communications port, etc.
America Online version 3.0
America Online v.3.0 ships with a MODEM.INI file. This file must be
modified in order to use the EtherExpress PRO/100 LAN+Modem PC
Card.
1 To update the MODEM.INI file, do the following: