Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 59)

Windows 3.x/MS-DOS Installation 4-21
5 Follow the prompts to complete the Intel segment of the installa-
tion.
6 Start Windows and, in the Network program group, double-click on
the Network Setup icon.
7 If you have not installed network support, choose Networks in the
Network Setup dialog box, select Install Microsoft Windows
Network, and click OK. Otherwise proceed with step 8.
8 In the Network Setup dialog box, choose Drivers.
9 In the Network Drivers dialog box, choose Add Adapter.
10 In the Add Network Adapter box, choose Unlisted or Updated
Network Adapter and click OK.
11 When prompted for an “unlisted, updated, or vendor-provided
network driver disk,” insert the Intel Network Drivers Disk.
12 Select “Intel M16B NDIS 2.01 Real Mode,” and click OK.
13 Close the Network Drivers dialog box and click OK in the Network
Setup box.
14 Complete the installation process, inserting Intel Disk 2, Network
Drivers Disk if required.
15 Continue with the installation until it is completed.
16 Click on the Control Panel in the “Main” group.
17 Select Startup from the Control Panel.
18 In the Options for Enterprise Networking window click “Log on to
Windows NT or LAN Manager Domain.”
19 Save, exit, and reboot the PC.
Windows for Workgroups
NDIS 2.01 and ODI Drivers
Instructions are provided for installing Intel network drivers for the first
time on a system using Windows for Workgroups version 3.11 alone or
with NetWare. These instructions assume that Windows for Workgroups
has already been installed. Remove any earlier version of the Intel drivers
before installing the new version. No NDIS 3 driver is supplied for
Windows for Workgroups.