Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 142)

6-18 PRO/100 LAN+Modem PC Card User’s Guide
&V View Configuration Profile
The AT&V command displays the contents of the active configuration
profile.
&Wn Write Active Profile to Memory
The AT&Wn command, where n is 0, allows you to save a copy of the
current active configuration profile to nonvolatile memory. This profile
can be restored at any time by using the ATZ command or a power-up
reset of the modem.
&Yn Select Stored Profile for Hard Reset
This command is included for compatibility with applications that use the
&Y0 command. It does not affect the behavior of the modem.
&Y0 Select stored profile 0 on power up
&Y1 ERROR
&Zn=x Store Telephone Number
The AT&Zn=x command is used to store a telephone number for later
dialing using the ATDS=n (dial stored number) command. In this
command, n is 0 or 1 representing 2 storage locations and x is the stored
number.
The dial string may contain up to 40 characters.
\Gn Modem Port Flow Control
The AT\Gn command determines whether XON/XOFF flow control
will be used.
\G0 Returns OK for compatibility (default)
\G1 Not supported; returns ERROR
\Jn Adjust BPS Rate Control
\J0 Turn off feature (default)
\J1 Turn on feature