Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 20)

2-8 PRO/100 LAN+Modem PC Card User’s Guide
How to Install for Windows 95 and NetWare
1 Install the PRO/100 PC Card driver and verify the installation as
described above in the installation procedures.
2 In the Control Panel, double-click the Network icon.
3 From the Configuration tab in the Network window, click Add.
4 From the Select Network Component Type window, select Client
and click Add.
5 Under Manufacturers in the Select Network Client window, select
Microsoft.
6 In the Network Clients window, select Client for NetWare Net-
works.
7 Click OK (you will be returned to the Network window).
8 From the Configuration tab in the Network window, click Add.
9 From the Select Network Component Type window, select Protocol
and click Add.
10 Select Microsoft as the manufacturer and IPX/SPX-compatible
Protocol under Network Protocols, then click OK to return to the
Network window.
11 Click OK to close the Network window, then restart the computer
when prompted.
Utilities
Several utilities are provided with the PRO/100 PC Card that run under
Microsoft Windows or MS-DOS. The utilities are:
• Country Identifier Utility (Windows 95, NT, 3.x)
• Modem Test (Windows 95, NT, 3.x)
• Diagnostic Test (MS-DOS prompt required)