Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 74)

4-36 PRO/100 LAN+Modem PC Card User’s Guide
Here are some examples of MEMORY keyword settings and the corre-
sponding 8K exclusion:
Configuration Keyword Setting Exclusion
NET.CFG MEM CC000 X=CC00-CDFF
PROTOCOL.INI MEMORY=D4000 X=D400-D5FF
Command Line
MEMORY=C8000 X=C800-C9FF
Notes
Memory settings used to configure the PRO/100 PC Card
always use 5 digits. Memory settings on the EMM386 command
line only require 4 digits.
With Card and Socket Services, the memory exclusion is
generally much larger than that required without them. This
exclusion range should not be reduced.
Windows and EMM386
If you are using EMM386 and Windows, you should add an
EMMEXCLUDE= line to the [386enh] section of the SYSTEM.INI file.
The exclusion range should match the exclusion on the EMM386 line.
If you are not using EMM386, but are using Windows, then you MUST
add an EMMEXCLUDE= statement to the [386enh] section of the
SYSTEM.INI file. The exclusion range must match the memory window
the PRO/100 PC Card is using.
Windows 3.x Modem Driver Settings
The modem utility IMENABLE.COM searches for an available COM
port or one specified by the user and configures the Intel adapter hard-
ware accordingly.
Modem Driver Configuration Notes
If you want to use the modem without loading a network driver, and you
are not using Card and Socket Services or the equivalent under Microsoft
Windows 95 or NT, you have to load the modem driver
IMENABLE.COM, supplied on Disk 2. Network Drivers Disk. (If you
load a network driver such as M16BNDIS, M16BODI, or M16BPD, you