Invacare Lynx L-3X - Manual (Page 23)

5 INSPECTION
Part No. 1145807 23 Lynx™L-3X Scooter
Inspect/Adjust Monthly
❑ Check brake for binding or interference with travel.
❑ Inspect front wheel/fork assembly for proper tension by spinning the wheel. The front wheel should come to a gradual stop.
❑ Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel binds to a stop.
❑ Inspect seat swivel for release and engagement (seat locks into the determined swivel positions).
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify that the hardware that attaches the seat positioning strap to the
frame is secure and undamaged. Replace if necessary.
❑ Ensure that the bolts and fasteners on the caster assemblies are tight.
Inspect/Adjust Periodically
❑ Ensure that the powered scooter drives straight (no excessive drag or pull to one side).
❑ Check frame for damage and corrosion.
❑ Ensure that the brake release lever is easy to engage/disengage.
❑ Inspect for no excessive side movement or binding when the drive wheels are raised or turned.
❑ Check front fork for damage or corrosion.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Clean upholstery and armrests.
❑ Inspect the seat upholstery for rips and tears.
❑ Ensure armrest pad sits flush against arm tube.
❑ Check that all labels are present and legible.
❑ Inspect electrical components for signs of corrosion. Replace if corroded or damaged.