2 service indicator error codes, Flash, Description – Invacare Lynx L-3X User Manual

Page 59: Meaning, Refer

Advertising
background image

14 TROUBLESHOOTING

Part No. 1145807

59

Lynx™L-3X Scooter

14.2 Service Indicator Error Codes

For the following table, refer to

FIGURE 6.1 on page 25.

FLASH

DESCRIPTION

MEANING

1

Batteries need charging.

Recharge the batteries. Refer to Removing/Installing the Batteries on page 35.

2

Low battery voltage.

Recharge the batteries before using. Refer to Charging the Batteries on page 40.

3

Battery voltage too high.

Check battery condition and connections. Contact a qualified technician to check your battery charger.

4

Motor current error.

Scooter has drawn too much current. Verify there are no objects blocking the tires.

5

Brake release lever is

disengaged.

Engage the brake release lever. Refer to Engaging/Disengaging the Brake Release Lever on page 26.

Turn the key off, then on to reset. If this does not correct the problem, contact a qualified technician.

6

Throttle control lever not in

neutral.

Turn the scooter power off, verify the throttle control lever is in the center position, and turn the power

back on. If this does not correct the problem, contact a qualified technician.

7

Throttle control lever

malfunction or speed pot error.

Contact a qualified technician.

8

Motor problems.

Contact a qualified technician.

9

Other internal errors.

Contact a qualified technician.

Advertising