Ice-O-Matic GEM0956R - Manual (Page 45)

GEM0650/0956/1256 Remote R&R-Fan Blade and Motor
Page 39
To Remove the Condenser Fan Motor Assembly:
1. Disconnect electrical power to the ice machine and/or remote condenser.
2. Remove fan guard.
3. Remove the fan blade.
4. Disconnect the electrical power lead to the fan motor.
5. Remove the four (4) bolts from the fan motor assembly.
6. Remove the fan motor assembly.
7. To Reassemble: Place the fan motor assembly on the condenser bracket and install
the bolts. Wire the fan motor power leads, install the fan blade and replace the fan
guard.
Fan Guard
Fan Blade
Fan Motor