Invacare Wheelchair XP6500 - Manual (Page 39)

SECTION 8—SEAT AND BACK
Part No. 1123839 39
SECTION 8—SEAT AND BACK
ƽ WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off
switch on the joystick is in the Off position.
Replacing the Seat Upholstery
NOTE: For the following procedure, refer to FIGURE 8.1.
1. Remove the mounting screws that secure the existing seat upholstery to the
wheelchair frame.
NOTE: Refer to the following table to determine the number of mounting screws for each seat
depth.
2. Remove the existing seat upholstery from the wheelchair frame.
3. Install new seat upholstery by reversing Steps 1-2.
FIGURE 8.1 Replacing the Seat Upholstery
SEAT DEPTH NUMBER OF SCREWS
16 inch
18 inch
8
10
Seat Upholstery
Wheelchair Frame
Mounting Screws
16-inch Seat Depth