Invacare Wheelchair XP6500 - Manual (Page 42)

42 Part No. 1123839
SECTION 8—SEAT AND BACK
Replacing Seat Positioning Strap
NOTE: For this procedure, refer to FIGURE 8.4.
1. If necessary, remove the seat cushion from the seat upholstery.
2. Remove the two rear phillips screws and washers that secure the seat upholstery and
seat positioning strap to the crossbraces.
3. Remove the two halves of the seat positioning strap from the crossbraces.
4. Position the two new seat positioning strap halves between the seat upholstery and
the crossbraces.
5. Reinstall the rear phillips screws and washers that secure the seat upholstery and seat
positioning strap to the crossbraces.
NOTE: Washer is positioned on top of seat upholstery.
6. If necessary, reinstall the seat cushion onto the seat upholstery.
FIGURE 8.4 Replacing Seat Positioning Strap
Rear Phillips Screw
Seat Upholstery
Crossbrace
Seat Positioning
Strap
Washer