Section 12—clutch/motor lock, Engaging/disengaging the clutches, Engaging/disengaging the clutches on – Invacare Wheelchair XP6500 User Manual

Page 56

Advertising
background image

56

Part No. 1123839

SECTION 12—CLUTCH/MOTOR LOCK

SECTION 12—CLUTCH/MOTOR

LOCK

ƽ WARNING

After ANY adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely - otherwise injury or damage may result.

Engaging/Disengaging the Clutches

ƽ WARNING

DO NOT engage or disengage the clutches until the power is Off.

NOTE: For this procedure, refer to FIGURE 12.1.
The clutch engagement/disengagement allows freewheeling or joystick controlled

operation. Freewheeling allows an attendant to maneuver the wheelchair without power.

To engage/disengage the clutches:
1. Locate the clutch handles on motors.

ƽ WARNING

If clutch handles are forced to engage in the wrong direction as shown in

FIGURE 12.1, the motors will be damaged and will need to be replaced.

2. Perform one of the following:
• To Engage: turn the clutch handles until they are pointing towards the rear of the

wheelchair. NEVER try to turn the clutch handles towards the front of the wheelchair.

• To Disengage: turn the clutch handles until they are pointing towards the rear wheels.

NEVER try to turn the clutch handles towards the inside of the wheelchair.

FIGURE 12.1 Engaging/Disengaging the Clutches

Disengaged (Toward Rrear Wheels)

Top View Of Wheelchair

Clutch Handle

Clutch Handle

NOTE: NEVER force clutch

handles in these directions.

Engaged

(Toward Rrear

of Wheelchair)

Advertising
This manual is related to the following products: