2 adjusting your phone, 1 adjust the angle of the phone, 3 volume – InSciTek Microsystems Allworx Phone User Manual
Page 6: Adjusting your phone, Djust the, Ngle of the, Hone, Hange the, Abels for, Pfk (p
Phone Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: March 28, 2007
Page 2
2 Adjusting
Your
Phone
2.1 Adjust the Angle of the Phone
Allworx 9112 Phone
You can adjust the Allworx 9112 phone on its base, so that it is easy to use and easy to read the screen.
1. Grasp the phone and the base separately.
2. Press the locking tab on the base.
3. Tilt the phone up or back in its base.
4. Pull up on the locking tab to insure the position of the phone is locked.
Allworx 9102 Phone
You must set up the support arm on the back of the Allworx 9102 phone, so that it is easy to use and easy to
read the screen.
1. Grasp the phone with one hand and grasp the wall-mount base with the other hand.
2. Depress the two tabs on either side of the wall-mount base.
3. While holding the phone upright, swing the base out until the support arms are released.
4. Locate the slots on the back of the phone in the middle on each side.
5. Grasp each support arm at the same time and gently insert them into the slots until they snap in.
2.2 Change the Labels for PFK (Programmable Function Key)
Make sure you keep your PFKs labeled correctly to prevent misdialing. The PFK labels are only available on
the Allworx 9112 phone.
To change a label:
1. Remove the paper from beneath the plastic label cover by pulling the plastic cover forwards.
2. Update the PFK setting on the label.
3. Place the label back under the cover.
A word template can be obtained at our website (www.allworx.com/support/downloads/default.asp, select the
Documentation link).
2.3 Volume
You can adjust the volume of the incoming ring, handset speaker, speakerphone, and the headset. The
volume will be adjusted for the device that you are currently using.
To adjust the Volume: