IBM F50 RS/6000 7025 - Manual (Page 124)

CALL-IN/CALL-OUT SETUP MENU
CALL-IN/CALL-OUT SETUP MENU
1. Modem Configuration Menu
2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
8. Ring Indicate Power-On Menu
98. Return to Previous Menu
99. Exit from Menus
Modem Configuration Menu, see “Modem Configuration Menu.”
Serial Port Selection Menu, see “Serial Port Selection Menu” on page 4-17.
Telephone Number Setup Menu, see “Telephone Number Setup Menu” on
page 4-18.
Call-Out Policy Setup Menu, see “Call-Out Policy Setup Menu” on page 4-20.
Customer Account Setup Menu, see “Customer Account Setup Menu” on
page 4-22.
Ring Indicate Power-On Menu, see on page 4-12.
Modem Configuration Menu
The first two lines of the Modem Configuration Menu are status lines showing the
current selections. Selections are made in the two section labeled Modem Ports and
Modem Configuration File Name. Select the serial port that you that you want to
activate and then select the modem configuration file for the modem on the port. If
you wish to set up both serial ports with modems, make your selections one port at a
time.
4-16 IBM RS/6000 7025 F50 Series User's Guide