IBM F50 RS/6000 7025 User Manual
Page 180
5. If you are not installing another adapter in this expansion slot, reinstall the
expansion-slot cover:
a. Slide the cover over the open expansion slot.
b. Install the screw and tighten with a screwdriver.
c. If the adapter removed had cables that are no longer required, you may want
to remove them.
6. Replace the I/O planar cover as described in “Replacing the I/O Planar Cover”
on page 5-101; then return here to determine your next step.
7. Go to “Device Records” on page A-2 and delete the name of the adapter you
removed; then return here to determine your next step.
8. If you have other procedures to perform, refer to “Option List” on page 5-17.
9. If you do not have any other procedures to perform, replace the covers as
described in “Replacing Both the Front and Side Covers” on page 5-96.
5-36
IBM RS/6000 7025 F50 Series User's Guide