IBM F50 RS/6000 7025 - Manual (Page 358)

static-sensitive devices, handling 5-3
STBY E-2
stopping the system unit
2-1
storage devices 5-4
surveillance
failure 4-29
operating system
4-29
set parameters 4-11
system firmware 4-29
Sys Config program 3-5
system administrator 4-19
system information menu 4-13
system phone number 4-20
system POST errors
read 4-5, 4-14
system power-on methods 4-26
system programs 3-1
Start Up 3-8
starting 3-1, 3-24
Sys Config
3-5
Utilities 3-10
system records A-1
key serial number A-1
machine type/model A-1
serial number A-1
system startup 1-1
system unit
starting 2-1
stopping 2-1
T
tape drive
installing 5-44
removing 5-82
telephone line requirements for the
United Kingdom xii
testing the setup
call-in C-2
call-out C-2
tools 5-91
trademarks xvii
U
ubolt, installing 5-91
unattended start mode,
enable/disable 4-12
United Kingdom’s telephone line
requirements xii
unloading the 4-mm tape
cartridge 2-40
unloading the 8-mm tape
cartridge 2-28
unlocking the system door 5-6, 5-10
unpacking the system 1-3
Unplug all power cords (cables) 5-12
upgrading or adding
CPU card 5-37
memory 5-18
upgrading or adding CPU card 5-37
using
system verification procedure 8-1
using the 3.5–inch diskette drive 2-10
using the 4.0GB 4-mm tape drive 2-37
using the 5.0GB 8-mm tape drive 2-24
using the CD–ROM drive 2-12
using the hot swap disk drives 2-15
using the keyboards 2-4
using the mouse 2-6
using the system verification
procedure 8-1
Utilities program 3-10
V
voice phone number 4-20
VPD (vital product data) 4-13
X-6 IBM RS/6000 7025 F50 Series User's Guide