IBM F50 RS/6000 7025 User Manual
Page 198
e. Move the carrier latch to the locked position. If the carrier will not lock, check
that the drive carrier is fully seated in the backplane. When the drive carrier
is fully seated and power is turned on, the green LED on the drive carrier will
illuminate.
4. See “Disk Drive Status LED States” on page 2-18 for information on disk drive
lights.
5. Go to Table A-2 on page A-4 to record the drive location for the drive; then
return here to determine your next step.
6. If you have other drives to install, go to page 5-43.
7. If you have other procedures to perform, refer to “Option List” on page 5-17.
8. If you do not have any other procedures to perform, replace the covers as
described in “Replacing the Front Covers” on page 5-93.
5-54
IBM RS/6000 7025 F50 Series User's Guide