IBM F50 RS/6000 7025 - Manual (Page 41)

Using the Hot Swap Disk Drives
For information on installing hot swap drives refer to “Installing a SCSI Disk Drive in
Bank C, D, or E.” on page 5-51.
For information on removing hot swap drives refer to “Removing a SCSI Disk Drive
from Bank C, D, or E” on page 5-83.
Relationship of AIX Prompts and Physical Drive Location
A SCSI adapter and a SCSI drive address can be displayed on a user display. The
AIX command lscfg list the attached devices on the system display. A SCSI adapter
and drives might be listed as:
Labels on the right side of each bank, identify the PCI Bus indicator and PCI Slot
address for the SCSI adapter attached to each bank.
Physical Slot of SCSI Adapter Bank Label
9I/P 30 - 78
8I/P 30 - 70
7P 30 - 68
6P 30 - 60
5P 10 - 78
4P 10 - 70
3P 10 - 68
2P 20 - 60
1P 20 - 58
Second Integrated SCSI Controller 30 - 58
First Integrated SCSI Controller 10 - 60
Chapter 2. Using the System Unit 2-15