IMC Networks FiberLinX - Manual (Page 15)

System Requirements
To run iView for FiberLinX, the management PC must be equipped with the
following:
• 20 MB free disk space, 32 MB RAM
as well as one of the following operating systems:
• Windows
TM
95/98/NT (standalone or with OpenView)
• HP-UX and OpenView
• IBM AIX and NetView or OpenView
• Solaris and OpenView
Please consult the iView CD for assistance in installing and launching
iView for FiberLinX.
Using iView To Manage FiberLinX
iView for FiberLinX features a Module Detail Screen, the main viewing
screen for iView for FiberLinX. Depending on whether you are managing a
standalone unit or dual (Host/Remote) FiberLinX units, iView’s displays and
options will vary.
From within iView for FiberLinX, you can use its virtual faceplate
display(s) to remotely manage your FiberLinX unit(s).
Note that within iView for FiberLinX, the only end-user configuration
options are creating descriptions for the units and disabling/enabling ports
(default on all ports is enabled). The rest of the functions are purely
information-related.
For a window-by-window guide to iView for FiberLinX, please consult the
FiberLinX online help file (choose Start, Programs, IMC Networks, iView,
FiberLinX Help, or use the Help menu within iView for FiberLinX).
If Using iView with HP OpenView
During the installation process, iView will ask if HP OpenView is installed
on the management PC. Click Yes to integrate the appropriate files.
You can also manually copy the file FLINX.REG into the appropriate
OpenView resource file on the management PC (usually C:\openview\
resource\c).
3.3