IMC Networks FiberLinX - Manual (Page 18)

Example 2:
Fiber Conversion and Remote Management Between Two
Copper-Based Switches
In this situation, configure the Central site’s unit as a Host with
management traffic through the twisted pair data port, and the Remote site's
unit to accept management traffic through the fiber data port.
Note that the twisted pair management ports on both FiberLinX remain
unused.
NOTE: You can access and manage the Remote site’s FiberLinX directly
in this configuration if you assign the unit an IP address.
4.2
E X A M P L E 2 : D I P S W I T C H S E T T I N G S
FiberLinX
Central (Host)
Remote
Switch 5
ON
ON
Switch 6
OFF
ON
Switch 7
OFF
ON
Switch 8
ON
OFF