IMC Networks FiberLinX User Manual

Page 31

Advertising
background image

Installing HUBCTRL32

Once the setup is launched:

1) Another Welcome dialog box for the HUBCTRL32 Setup

Program will appear.

NOTE: It is strongly recommended that you exit all Windows

applications before continuing.
Click Next to continue, Cancel to exit the installation process.

2) The License Agreement dialog box will appear. Click Yes to

accept the license agreement.

3) The User Information dialog box will appear. Enter your user

information. Click Next to continue.

4) The Choose Destination Location dialog box will appear. Here,

you will decide exactly where you want HUBCTRL32 and its

associated files installed. The default is:

C:\Program Files\Hub Control32

To change this location, click Browse… To accept the

designated location, click Next.

5) The Select Program Folder dialog box will appear. Here, the

utility will create a Program group and icons for HUBCTRL32

from the Windows Start menu. The default name of this

Program group will be "Hub Control32." To change this name,

highlight "Hub Control32" and type the new name. To accept

the default name, click Next.

6) The Copy Files dialog box will appear showing the current

install settings. Click Next.

7) The SNMP NDIS3 Packet Driver Installation Instructions dialog

box will appear.
NOTE: THIS WINDOW CONTAINS VITAL INSTRUCTIONS

FOR THE CORRECT INSTALLATION OF HUBCTRL32 ON

YOUR MACHINE. PLEASE READ THIS SCREEN AND FOLLOW

THE INSTRUCTIONS CAREFULLY ONCE THE SETUP UTILITY

ENDS.
NOTE: This is your last opportunity to click on Back and change

any of the settings already configured in the Setup utility.

Click Next to continue.

8) The

Setup Complete dialog box will appear. Note that you will

still need to install the SNMP NDIS driver (see 7, above). Click

Finish.

Ap.5

Advertising