If not using iview – IMC Networks FiberLinX User Manual
Page 16
Once in OpenView, highlight the FiberLinX icon and select the
Tools, FiberLinX; OpenView will then launch iView.
If NOT Using iView
NOTE: Installation of SNMP software differs from one package to
another. This section describes the steps required to integrate the
IMC Networks agent with other management software. For instal-
lation details on the the management software being used, refer to the
manufacturers documentation.
The majority of management packages have a function known as MIB
COMPILER. This function reads in the MIB information and converts it into
machine-readable format.
In order to successfully manage FiberLinX with your chosen application,
the MIBs listed below need to be integrated into the management software:
FLINX.MIB
RFC1643.MIB
Refer to the management software documentation regarding how MIBs
are integrated into the software.
NOTE: Although graphics are a desirable feature for viewing FiberLinX
information, this same information can be seen by browsing the MIB
information to which the management software has access.
3.4